AdaWiki

User Tools

Site Tools

You are here: start » x0x » vcffabrication
Trace: • dinsync • vcffabrication
x0x:vcffabrication

Pointers

Fabrication Info

DifficultyRating: 7.5 / 10

Components 66
Resistors 30
Capacitors 10 Electrolytic, 6 Polyester
Diodes 1
Transistors 15
ICs 0
Other 3 Pots, 1 Trim Pot

Make sure you don't get the five pin transistors confused when building this section. There is one 2SC2291, and two 2SC1583 transistors. Also, the picture of the completed VCA on the main fabrication page is wrong, C23 is backwards.

As with the previous section, solder in all components except the potentiometers, and then solder in the pots.

Additions

You might want to mount Q9 and Q10 on Sip Sockets so you can replace the transistors with higher gain transistors at a later date. See higher_beta_transistors_on_q9_and_q10

Schematic Power Supply Voltage Controlled Oscillator Voltage Controlled Filter Envelope Generator Voltage Controlled Amplifier Headphone And Mixer Digital Sequencer Midi, USB and Sync
Fabrication Building the Ps Building the Vco Building the Vcf Building the Envelope Building the Vca Building the Headphone And Mixer Building the Sequencer Building the Midi and Sync Finishing It Off
Testing Testing the Ps Testing the Vco Testing the Vcf Testing the Envelope Testing the Vca Testing the Headphone And Mixer Testing the Sequencer Testing the Midi and Sync
Mods Ps Mods Vco Mods Vcf Mods Envelope Mods Vca Mods Headphone And Mixer Mods Sequencer Mods Midi And Sync Mods Finishing Mods
/home/ladyada/public_html/wiki/data/pages/x0x/vcffabrication.txt · Last modified: 2016/01/28 18:05 (external edit)

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki