Testing the Envelope

  1. Power up the main board by connecting J4
  2. Clip one end of an aligator clip to the south side of R146 (this provides the gate signal), and the other end to the exposed side of R3 on the IO board.
  3. Check the voltage on the north side of D35. It should be 12V when the clip is connected, and 0V when it isn't.
Schematic Power Supply Voltage Controlled Oscillator Voltage Controlled Filter Envelope Generator Voltage Controlled Amplifier Headphone And Mixer Digital Sequencer Midi, USB and Sync
Fabrication Building the Ps Building the Vco Building the Vcf Building the Envelope Building the Vca Building the Headphone And Mixer Building the Sequencer Building the Midi and Sync Finishing It Off
Testing Testing the Ps Testing the Vco Testing the Vcf Testing the Envelope Testing the Vca Testing the Headphone And Mixer Testing the Sequencer Testing the Midi and Sync
Mods Ps Mods Vco Mods Vcf Mods Envelope Mods Vca Mods Headphone And Mixer Mods Sequencer Mods Midi And Sync Mods Finishing Mods