x0x:vcofabrication
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
|
x0x:vcofabrication [2007/12/03 05:12] 127.0.0.1 external edit |
x0x:vcofabrication [2016/01/28 18:05] (current) |
||
|---|---|---|---|
| Line 7: | Line 7: | ||
| If you are unsure of your soldering skills, you can also mount the 3 ICs on DipSockets. Also, if in the future one of these ICs were to fail, you will be glad you socketed them! | If you are unsure of your soldering skills, you can also mount the 3 ICs on DipSockets. Also, if in the future one of these ICs were to fail, you will be glad you socketed them! | ||
| + | |||
| + | According to the build manual when the sawtooth and squarewave are tested, R36 is not yet soldered in, but on the fotos it is there. It's a good idea to have R36 soldered when testing to get the correct waveforms and DC bias. | ||
| ==== Mistakes to avoid ==== | ==== Mistakes to avoid ==== | ||
/home/ladyada/public_html/wiki/data/attic/x0x/vcofabrication.1196658729.txt.gz · Last modified: 2016/01/28 18:05 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
