AdaWiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
==== Driver Installation Mac OS X  ====


Open up the driver dmg file

{{  http://www.ladyada.net/images/arduino/driverdmg.jpg?nolink&632x354  |}}

And double click on the driver package, go through all the steps necessary to install the driver 

{{  http://www.ladyada.net/images/arduino/driverinstall1.jpg?nolink&620x440  |}}

{{  http://www.ladyada.net/images/arduino/driverreadme.jpg?nolink&620x440  |}}

You will need administrative priviledges to install the software

{{  http://www.ladyada.net/images/arduino/auth.jpg?nolink&433x235  |}}

When it's done, restart the computer 

{{  http://www.ladyada.net/images/arduino/driverhd.jpg?nolink&620x440  |}}

{{  http://www.ladyada.net/images/arduino/driverwarn.jpg?nolink&424x157  |}}

{{  http://www.ladyada.net/images/arduino/driverrestart.jpg?nolink&620x440  |}}

Once its rebooted, start up **Terminal**, located in the **Utilities** folder

{{  http://www.ladyada.net/images/minipov3/findterminal.jpg?nolink&438x351  |}}

Plug in the Arduino, make sure the green light is on. \\ In the **Terminal **window, type in **ls /dev/cu.*** and/or **ls /dev/tty.*** which should give the following responses

{{  http://www.ladyada.net/images/arduino/lscu.jpg?nolink&503x252  |}}

{{  http://www.ladyada.net/images/arduino/lstty.jpg?nolink&503x252  |}}

 Make sure you see a line with the text **/dev/cu.usbserial-xxxxx** where the xxx's can be anything. Same for **/dev/tty.usbserial-xxxxx**. This indicates that the driver installed properly and that the Arduino was found.

If you can't find the text, verify that your Arduino is plugged in, try a different USB port.  \\ You can also try running the **Console** application, which will possibly give you some information about why its failing.
AdaWiki

User Tools

Site Tools

Page Tools
