Differences

This shows you the differences between two versions of the page.

--- x0x:envelopemods [2007/04/04 06:07]
creekree
+++ x0x:envelopemods [2007/09/19 04:00]
creekree
@@ Line 6: / Line 6: @@
 ==== Gate On Forever ====
 Tie a line from the juncture of D36 and R134 to a single pole switch, and the other end to 12V.  When the switch is on, your notes will be on forever.
+A good place to get 12V is pin 3 of J4 (pin 1 is 5.333v, pin 2 GND and pin 3 12v)
 ==== (Momentary) Envelope Re-trigger ====
 In situations where you are using the box with the Gate On mod above either with the internal sound or and external audio input you may want to re-trigger the envelope generator (the main EG - the one for the filter/accent/sweep). You would do this by hooking up a switch connected to 12v and the junction of D37/R152.
 ==== Variable VCA Decay ====
-r123 controlls the decay of the VoltageControlledAmplifier, replace this with a pot to get variable decay.
+R123 sets the vca decay. The stock value is 1.5M and gives a vca decay time of about 3 seconds. Smaller value will give shorter decay, larger value will give longer decay. Generally you would put a 1M pot there in series with a resistor for vca decay control - if you find a 1.5M or 2M pot somewhere that's even better.
 ==== Variable Accent Decay ====

AdaWiki