User Tools

Site Tools


wavebubble:errata

This is an old revision of the document!


Table of Contents

Unfortunately, there are many errors or discrepancies between the various resources available for this project. Eventually, they will all be listed here; if you can then update one of the resources (schematic, PCB layout, assembly directions), please do so and then remove the error from this list.

Forum threads:

Part changes:

Part Incorrect Correct Remarks
C20 160pF, do not place 390-550pF, placement recommended.
C40 68pF ? Sirenza datasheets say 1-2pF, not clear if this is an error or not
C50 ? 1 uF 1206
C51 ? .1 uF 1206
C52 ? 1 uF 1206
C53 ? .1 uF 1206
C63 ? 1pF 0603
C77 ? 4.7uF or 1uF, 0603 Filter cap; 4.7uF part is difficult to get in 0603, 1uF is ok
C80 20pF 22pF Substitute to save money by combining order with other 22pF caps
C81 20pF 22pF Substitute to save money by combining order with other 22pF caps
C83 ? .1uF ? not listed in instructions
C84 ? .1uF ? not listed in instructions
IC2 LM2733X LM2731Y Either part will work, but the 33X is not recommended for supplies less than 16v
L1 15 uH 7.3 uH Only change if using LM2731Y
L5 ? 1K resistor
L6 ? 1K resistor
R3 ? 39K
R4 ? 12K
R8 ? do not place not usually necessary
R9 ? do not place not usually necessary
R12 ? 100 ohms not a critical value (instructions say 68 ohms)
R13 100K 63K Value may vary to adjust VCO DC Offset gain
R15 100K 33K Value may vary to adjust VCO DC Offset gain
R27 0 ohms ferrite bead
R28 0 ohms ferrite bead

Misc

The silkscreened part numbers for the tiled Gerbers are incorrect; see http://www.ladyada.net/forums/viewtopic.php?t=4143 for more info.

/home/ladyada/public_html/wiki/data/attic/wavebubble/errata.1195821688.txt.gz · Last modified: 2016/01/28 18:05 (external edit)