AdaWiki

Link to this comparison view

@@ Line 1: / Line 1: @@
+While Sparkfun now operates both an MC-383V and an MC-384F, the machines are quite similar and the 383V is no longer manufactured. Therefore, I have listed specs for the 384. Below the specifications info are detailed a few of the differences between the two machines.
+**MC-384F Features, Specifications, and Costs**
+    * Head-Mounted Vision Cameras and Cognex ® Vision Processing for Non-Contact "On-the-Fly" Alignment of SMDs from 0.6 mm x 0.3 mm (0201 Footprint) to 16 mm x 14 mm, including flip-chips, CSPs, and µBGAs
+    * Bottom Vision Camera for Large Components up to 38 mm x 38 mm, including Fine-Pitch .020" (0.5 mm) QFPs
+    * Large 14.5" (370 mm) x 13.4" (340 mm) Placement Area with 128 Individual 8 mm or 12 mm Smart Tape Feeders Installed
+    * Additional Time-Pressure Dispense Head or Micro-Dispensing Head and ATP Digital Dispensing System Available for Application of Solder Paste and Adhesives at Dot Sizes Down To 6 mil (.015 mm) Diameter
+    * DC-Servo Drive with Closed Loop Encoding in All Four Axes (X, Y, Z, and R) for Placement Accuracy of ± .05 mm (± .002"); Precision Ball Screw Propulsion in X and Y Axes; Linear X-Y Drive Optional
+    * Windows ®-based Operating System and MC-300 Series Control Software with Programming via Direct Numeric Data Entry, Teach-Mode, or CAD Conversion and Download; Fully-Integrated Dispensing Software
+    * Remote Diagnostic Capability and Full One-Year Warranty
+**Specifications**
+Placement Rate 	4000 cph
+Maximum PCB Capacity 	14.5" (370 mm) x 13.4" (340 mm) with maximum
+Smart Tape Feeders installed.
+.1" (435 mm) x 13.4" (340 mm) with feeder bases mounted on only the front and rear of the system.
+Tape Feeder Capacity 	Up to 128 Manncorp 8/12 mm Smart Tape Feeders
+Component Size 	Min.: 0201 (0.6 mm x 0.3 mm)
+Max. w/ Vision-on-the-Fly:
+.63" (16 mm) x 0.55" (14 mm)
+Max. w/ Bottom Vision:
+.5" (38 mm) x 1.5" (38 mm)
+Component Lead Pitch 	.020" (0.5 mm) min. standard
+Placement Accuracy 	± .002" (± .05 mm)
+Drive Mechanism 	DC-Servo Motor (X, Y, Z, and R Axes) with Closed-Loop Encoding;
+Precision Ball Screw (X-Y Axes) standard
+Resolution 	X-Y Axes: .0003" (0.0075 mm)
+Z Axis: .0008" (0.02 mm)
+R Axis: 0.045° (through full 360° range of motion)
+Dimensions 	41" (1030 mm) L x 37" (940 mm) W x 49" (1250 mm) H
+Weight 	880 lb. (400 kg)
+Voltage Requirements 	120 V AC
+Air Pressure 	75 psi (min.)
+**Manncorp MC-300 Smart Feeders Key Features**
+    * New, Slim-Profile Hardware Design for Maximum Feeder Mounting and Utilization
+    * Built-In Memory Module Links Individual Tape Feeders to Specific Component Data (value, lot code, date code, quantity, package type, index increment, etc.)
+    * Data Values Written to Memory Modules are Retained When Feeders are Removed from Machine or Until Overwritten
+    * Connection Through Feeder Port and Base Links Smart Feeders to Known Location on Pick and Place Machine for Optimized Setups or Quick Changeover
+    * Automatic, Vision-Assisted Closed-Loop Adjustment of Smart Tape Feeder Pickup Position to Compensate for Loose Packaging Tolerance
+    * Ultra-Smooth, Electronic Tape Indexing and Adjustable Peel-Back Tensioner
+    * Optional 2 mm Minimum Indexing for Small 0201 and 0402 Devices
+    * Optional Bar Code Reader for Component Data Entry and Verification Prior to Assembly
+**Costs**
+  * Machine base cost lists at $44,995
+  * Feeders range from $550 to $2000 depending on size and type
+  * Be sure to register on [[https://www.manncorp.com/pick-and-place/mc384/|Manncorp's site]] for all the most up-to-date pricing and info.
+**MC-383V Differences**
+  * First of all, there aren't many differences. The 383 is a fine machine that continues to serve us reliably over 14 hours a day.
+  * The 384 does feature improvements to the bearings in the worm drive, allowing for a couple speed settings faster than that of which the 383 is capable.
+  * The cameras on the 384 are a bit improved.
+  * That's really about all we've found...although it did come with a nicer, widescreen monitor.
+  * Check with the nice folks at [[https://www.manncorp.com/pick-and-place/mc384/|Manncorp]] for more info about the differences between specs for these machines...or look at the [[https://www.manncorp.com/pick-and-place/mannautocat2.pdf|brochure for the entire MC Series]].
+  * At the time of this writing, there was a refurbished MC-383L2OV on Manncorp's site for $24,995! Be sure to check their [[https://www.manncorp.com/used-equipment/|used equipment page]].

AdaWiki

User Tools

Site Tools

Page Tools