This shows you the differences between two versions of the page.
mdcpickandplace:sparkfun:specs [2016/01/28 18:05] |
mdcpickandplace:sparkfun:specs [2016/01/28 18:05] (current) |
||
---|---|---|---|
Line 1: | Line 1: | ||
+ | While Sparkfun now operates both an MC-383V and an MC-384F, the machines are quite similar and the 383V is no longer manufactured. Therefore, I have listed specs for the 384. Below the specifications info are detailed a few of the differences between the two machines. | ||
+ | |||
+ | **MC-384F Features, Specifications, and Costs** | ||
+ | |||
+ | * Head-Mounted Vision Cameras and Cognex ® Vision Processing for Non-Contact "On-the-Fly" Alignment of SMDs from 0.6 mm x 0.3 mm (0201 Footprint) to 16 mm x 14 mm, including flip-chips, CSPs, and µBGAs | ||
+ | * Bottom Vision Camera for Large Components up to 38 mm x 38 mm, including Fine-Pitch .020" (0.5 mm) QFPs | ||
+ | * Large 14.5" (370 mm) x 13.4" (340 mm) Placement Area with 128 Individual 8 mm or 12 mm Smart Tape Feeders Installed | ||
+ | * Additional Time-Pressure Dispense Head or Micro-Dispensing Head and ATP Digital Dispensing System Available for Application of Solder Paste and Adhesives at Dot Sizes Down To 6 mil (.015 mm) Diameter | ||
+ | * DC-Servo Drive with Closed Loop Encoding in All Four Axes (X, Y, Z, and R) for Placement Accuracy of ± .05 mm (± .002"); Precision Ball Screw Propulsion in X and Y Axes; Linear X-Y Drive Optional | ||
+ | * Windows ®-based Operating System and MC-300 Series Control Software with Programming via Direct Numeric Data Entry, Teach-Mode, or CAD Conversion and Download; Fully-Integrated Dispensing Software | ||
+ | * Remote Diagnostic Capability and Full One-Year Warranty | ||
+ | |||
+ | |||
+ | **Specifications** | ||
+ | Placement Rate 4000 cph | ||
+ | Maximum PCB Capacity 14.5" (370 mm) x 13.4" (340 mm) with maximum | ||
+ | 128 Smart Tape Feeders installed. | ||
+ | 17.1" (435 mm) x 13.4" (340 mm) with feeder bases mounted on only the front and rear of the system. | ||
+ | Tape Feeder Capacity Up to 128 Manncorp 8/12 mm Smart Tape Feeders | ||
+ | Component Size Min.: 0201 (0.6 mm x 0.3 mm) | ||
+ | Max. w/ Vision-on-the-Fly: | ||
+ | 0.63" (16 mm) x 0.55" (14 mm) | ||
+ | Max. w/ Bottom Vision: | ||
+ | 1.5" (38 mm) x 1.5" (38 mm) | ||
+ | Component Lead Pitch .020" (0.5 mm) min. standard | ||
+ | Placement Accuracy ± .002" (± .05 mm) | ||
+ | Drive Mechanism DC-Servo Motor (X, Y, Z, and R Axes) with Closed-Loop Encoding; | ||
+ | Precision Ball Screw (X-Y Axes) standard | ||
+ | Resolution X-Y Axes: .0003" (0.0075 mm) | ||
+ | Z Axis: .0008" (0.02 mm) | ||
+ | R Axis: 0.045° (through full 360° range of motion) | ||
+ | Dimensions 41" (1030 mm) L x 37" (940 mm) W x 49" (1250 mm) H | ||
+ | Weight 880 lb. (400 kg) | ||
+ | Voltage Requirements 120 V AC | ||
+ | Air Pressure 75 psi (min.) | ||
+ | |||
+ | **Manncorp MC-300 Smart Feeders Key Features** | ||
+ | |||
+ | * New, Slim-Profile Hardware Design for Maximum Feeder Mounting and Utilization | ||
+ | * Built-In Memory Module Links Individual Tape Feeders to Specific Component Data (value, lot code, date code, quantity, package type, index increment, etc.) | ||
+ | * Data Values Written to Memory Modules are Retained When Feeders are Removed from Machine or Until Overwritten | ||
+ | * Connection Through Feeder Port and Base Links Smart Feeders to Known Location on Pick and Place Machine for Optimized Setups or Quick Changeover | ||
+ | * Automatic, Vision-Assisted Closed-Loop Adjustment of Smart Tape Feeder Pickup Position to Compensate for Loose Packaging Tolerance | ||
+ | * Ultra-Smooth, Electronic Tape Indexing and Adjustable Peel-Back Tensioner | ||
+ | * Optional 2 mm Minimum Indexing for Small 0201 and 0402 Devices | ||
+ | * Optional Bar Code Reader for Component Data Entry and Verification Prior to Assembly | ||
+ | |||
+ | |||
+ | |||
+ | **Costs** | ||
+ | * Machine base cost lists at $44,995 | ||
+ | * Feeders range from $550 to $2000 depending on size and type | ||
+ | * Be sure to register on [[https://www.manncorp.com/pick-and-place/mc384/|Manncorp's site]] for all the most up-to-date pricing and info. | ||
+ | |||
+ | |||
+ | **MC-383V Differences** | ||
+ | * First of all, there aren't many differences. The 383 is a fine machine that continues to serve us reliably over 14 hours a day. | ||
+ | * The 384 does feature improvements to the bearings in the worm drive, allowing for a couple speed settings faster than that of which the 383 is capable. | ||
+ | * The cameras on the 384 are a bit improved. | ||
+ | * That's really about all we've found...although it did come with a nicer, widescreen monitor. | ||
+ | * Check with the nice folks at [[https://www.manncorp.com/pick-and-place/mc384/|Manncorp]] for more info about the differences between specs for these machines...or look at the [[https://www.manncorp.com/pick-and-place/mannautocat2.pdf|brochure for the entire MC Series]]. | ||
+ | * At the time of this writing, there was a refurbished MC-383L2OV on Manncorp's site for $24,995! Be sure to check their [[https://www.manncorp.com/used-equipment/|used equipment page]]. | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||