skip to content

AdaWiki

User Tools

Log In

Site Tools

Recent Changes
Media Manager
Sitemap

You are here: start » mdcpickandplace » feeders

Trace:

mdcpickandplace:feeders

http://freaklabs.org/index.php/Blog/Misc/MDC-Pick-and-Place-Setup-Tutorial.html

===== Adjusting 8mm Feeders for thicker components =====

If you try to feed thicker 8mm tape through the standard 8mm reel configuration, the parts may pop out of place when the tape advances because they catch on the bottom.  To accomodate thicker parts (like 1.5mm high 0805 10uF caps, etc.), you can remove the plastic guide underneath the tape as follows.  This allows more bottom clearance for the tape.

{{:mdcpickandplace:tapeguidea.jpg|}}
{{:mdcpickandplace:tapeguideb.jpg|}}

/home/ladyada/public_html/wiki/data/attic/mdcpickandplace/feeders.1301128588.txt.gz · Last modified: 2016/01/28 18:05 (external edit)

Page Tools

Show page
Old revisions
Backlinks
Back to top

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International

CC Attribution-Share Alike 4.0 International