User Tools

Site Tools


This is an old revision of the document!

The Adobe Flash Plugin is needed to display this content.

Parts list!

Total is $50

Quick instructions

Cut the 20mm extrusion into ~18" pieces (make them a little shorter than the pick and place drawer.

Attach the pieces with L-brackets so that the L-brackets face each other on the inside of the holder and the outside right edge is flush with the drawer.

/home/ladyada/public_html/wiki/data/attic/mdcpickandplace/diytray.1286845526.txt.gz · Last modified: 2016/01/28 18:05 (external edit)