skip to content

AdaWiki

User Tools

Log In

Site Tools

Recent Changes
Media Manager
Sitemap

You are here: start » laserinfo » settings

Trace:

laserinfo:settings

====== Settings ======

===== Acrylic =====

For engraving, 100% speed and 55% (600dpi), 65% (400dpi) or 75% power (300dpi) -- Epilog Manual

For cutting, use 5000 ppi frequency. Remove the top layer of paper.

**REMEMBER THAT ACRYLIC IS FLAMMABLE - DO NOT LEAVE THE LASER UNATTENDED!**

^  Material  ^  35W Cut  ^  Notes  ^
^ Clear 1/16" (0.062") |  100% power, 20% speed  | A clean cut on paperbacked acrylic, higher speed may be OK   |
^ Clear 1/8" (0.125")  |  100% power, 12% speed  | From the Epilog Manual  |
^ Clear 1/4" (0.25")  |  100% power, 4% speed  | From the Epilog Manual  |

/home/ladyada/public_html/wiki/data/attic/laserinfo/settings.1173402436.txt.gz · Last modified: 2016/01/28 18:05 (external edit)

Page Tools

Show page
Old revisions
Backlinks
Back to top

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International

CC Attribution-Share Alike 4.0 International