Differences

This shows you the differences between two versions of the page.

--- laserinfo:settings [2007/03/09 01:07]
ladyada
+++ laserinfo:settings [2016/01/28 18:05] (current)
@@ Line 1: / Line 1: @@
-====== Settings ======
+====== Moved! ======
-===== Acrylic =====
+This tutorial has moved to [[http://learn.adafruit.com/all-about-laser-cutters|http://learn.adafruit.com/all-about-laser-cutters]]
-For engraving, 100% speed and 55% (600dpi), 65% (400dpi) or 75% power (300dpi) -- Epilog Manual
-For cutting, use 5000 ppi frequency. Remove the top layer of paper.
-**REMEMBER THAT ACRYLIC IS FLAMMABLE - DO NOT LEAVE THE LASER UNATTENDED!**
-^  Material  ^  35W Cut  ^  Notes  ^
-^ Clear 1/16" (0.062") |  100% power, 20% speed  | A clean cut on paperbacked acrylic, higher speed may be OK   |
-^ Clear 1/8" (0.125")  |  100% power, 12% speed  | From the Epilog Manual  |
-^ Clear 1/4" (0.25")  |  100% power, 4% speed  | From the Epilog Manual  |

AdaWiki