This is an old revision of the document!
You can only test ONE CABLE at a time
Plug in the cable into your computer (we will use Windows)
Go to the Device Manager (From the Start Menu, select Settings→Control Panel. Double click on System and select the Hardware tab. Then click on the Device Manager button)
When plugging in a USB cable, the window will refresh and you will see USB Serial Port (COMx)
If the new COM port doesn't show up, there is a problem with the cable
This is the end of your FTDI Cable
We added breakout wires to make it easy to measure voltages
Test voltage between black and red wires - it must be 5V
Test voltage between black and orange wires - it must be 3.3V
Download X-CTU: http://ftp1.digi.com/support/utilities/40002637_c.exe
Install software
Start up software
Select the COM port that says USB SERIAL PORT
Click on TERMINAL tab
FTDI cable has nothing attached to it
Type text into terminal window. All text should be blue
When done, click Clear Screen
Connect 100 ohm resistor between orange and yellow wires
Type text into terminal window, all characters will appear in blue AND red